- Alarm[4]
- Electrical Plugs & Sockets[5]
- Remote Control Switches[6]
- Motor Controller[1]
- Other Lights & Lighting Products[3]
- Remote Control[6]
- Other Accessories & Parts[6]
- Time Switches[6]
- Door Locks[6]
- Car Alarms[3]
- Other Car Care Equipment[2]
- Other Auto Electrical Systems[1]
- Auto Switches[1]
- Other Auto Electronics[1]
- Contact Person : Ms. Kang Koko
- Company Name : Shenzhen Daylight Easy Control Electronic Co., Ltd.
- Tel : 0086-755-36953478
- Fax : 0086-755-27338806
- Address : -1,Shenzhen,Block H04, Fenghuang Village, Fuyong, Bao'an
- Country/Region : China
- Zip : 518103
Auto-copy 2262/2240/2260 RF Remote control duplicator
Related Product Searches:Auto-copy 2262/2240/2260 RF Remote control duplicator,High Quality,Remote control duplicator, car remote control duplicator,DL-4021C
Model No.: DL-4021C
Description:Auto-copy 2262/2240/2260 RF Remote control duplicator
How wonderful if we don't need to worry about the lost of the remote, or if all the people in the village can open the gate(barrier) at the entrance.
This remote wireless control is fit for car alarms, home alarms, panic buttons, garage door, rolling curtain, etc. It will bring your much convenience. Don't hesitate to order one now!
Feature:
| Learning method: | self-learning |
| Learn mode: | face to face learning in seconds |
| Application: | car alarms, home alarms, panic buttons, garage door, rolling curtain, etc |
| Frequency: | 280-490Mhz |
| Learning code: | Fixed code & learning code |
Copy method:
a. Delete the original code.
Press the lock and unlock button at the same time for 2 seconds, the LED will flash and extinguish immediately, at this time, keep pressing the lock button, and release the unlock button, continue to press the unlock button for 3 times but within 3 seconds. When the LED flashes quickly, the code has been deleted. Now if you press any button, the LED will not flash immediately, that means the code has be deleted completely.
b. Copy the remote.
Make the remote to be copied and copy remote face to face, press the same button of the both remotes at the same time for 3 seconds, the LED will flash quickly, that means the code of this button has been learnt. Do the same operation for the other 3 buttons. It can even learn different code remote (same frequency) to one copy remote.
Attention: during the learning, pls make two remotes as close as possible, press the button of the remote to be copied a little longer to make sure the code has been learnt successfully.
C. Adjust the frequency:
If the frequency is 315Mhz, then copy operation can be done directly. If it is not this frequency, pls adjust the frequency to what you want by noninductive screw, and then copy. The frequency can be adjust from 280Mhz to 490Mhz. If the remote is with metal parts, then adjust 3Mhz lower to delete the influence to the frequency by the metal part, for example, adjust 315Mhz to 312Mhz, 433Mhz to 431Mhz. The frequency will be 315Mhz or 433Mhz after the assembling.
Shipment:
Auto-copy 2262/2240/2260 RF Remote control duplicator
